Export iten: EndNote BibTex

Please use this identifier to cite or link to this item: https://tede.unioeste.br/handle/tede/4975
Tipo do documento: Dissertação
Title: Construção e ensaio de pórticos em madeira colada com reforço nas ligações
Other Titles: Construction and testing of frame structures in glued laminated timber and with reinforcements in connections
Autor: Filippini, Daniele Finger 
Primeiro orientador: Petrauski, Alfredo
Primeiro membro da banca: Petrauski, Sandra Maria Ferreira Couri
Segundo membro da banca: Jordan, Rodrigo Aparecido
Terceiro membro da banca: Savaris, Gustavo
Resumo: Materiais provenientes de fontes renováveis vêm sendo cada vez mais utilizados na construção civil a fim de reduzir os processos de aumento da temperatura global. A utilização da madeira para finalidades estruturais apresenta-se como uma solução ambientalmente vantajosa nesse quesito, especialmente se provinda de florestas plantadas. Um dos sistemas estruturais mais utilizados no Brasil para execução de galpões compreende o uso de pórticos, compostos por pilares e vigas trabalhando em conjunto, que são utilizados geralmente em construções rurais, comerciais e industriais. Apesar de eficazes, análises experimentais do comportamento de pórticos em madeira laminada colada (MLC) são raros. Ainda, pesquisas recentes com pórticos em MLC despertam para a possibilidade de otimização desses sistemas utilizando reforços em pontos chave desse tipo de estrutura. Após um teste-piloto, conduzido com uma estrutura remontada de Stringari (2019), obteve-se um aumento de resistência de 42% quando da inclusão de reforços laterais nas ligações principais das estruturas utilizadas pelo pesquisador. Assim, o presente trabalho teve por finalidade construir e ensaiar cinco pórticos em madeira laminada colada, confeccionados utilizando madeira da espécie Araucaria angustifolia e adesivo de poliuretano à base de óleos vegetais. Os pórticos mantiveram a geometria do trabalho de Stringari (2019), porém com reforços nas ligações entre as vigas de cobertura e os pilares. Os valores de força de ruptura das estruturas foram em média 38,02 kN, aproximadamente 5,47 vezes a carga de projeto e representaram um aumento de 32% de resistência se comparadas às estruturas não reforçadas de Stringari (2019). Os deslocamentos observados, com destaque para a cumeeira, não atingiram o limite normativo brasileiro para a carga de projeto e apresentaram comportamento linear para forças superiores a três vezes às de projeto. Desta forma, as estruturas apresentaram um comportamento estrutural satisfatório e a utilização de MLC e do adesivo à base de óleos vegetais pode ser considerada viável para a execução de pórticos.
Abstract: Building materials from sustainable sources have being increasingly used in construction sites in order to avoid the processes of global warming. Using wood for structural purposes has presented itself as environmentally advantageous solution, especially if it comes from planted forests. One of the most used structural systems in Brazil for building sheds are portics. They are structures composed of pillars and beams working together as one, which are generally used in rural, commercial and industrial construction. Although effective, experimental analyzes of glued laminated timber portics behavior – glulam portics are still rare. In addition, recent researches with glulam frame structures rise the possibility of optimizing these systems using reinforcements at specific key points of the structure. After an initial test, conducted with the reassembled structure from Stringari (2019), a 42% increase in strength was obtained when including lateral reinforcements in the main connections of the researcher's structures. Therefore, the purpose of the present work is to build and test five framed structures of glued laminated timber, built using Araucaria angustifolia wood and polyurethane adhesive based on vegetable oils. The frames maintained the geometry of Stringari's (2019) work, but with reinforcements on the connections between the roof beams and the pillars. The rupture force values of the structures were, on average, 38.02 kN, approximately 5.47 times the design load and showed an increase of 32% of resistance when compared to the non-reinforced structures of Stringari (2019). The measured displacements, especially on the ridge, did not reach the brazilian normative limit for the design load and presented a linear behavior for forces greater than three times the designed ones. The structures presented a satisfactory structural behavior and the use of glulam and adhesive based on vegetable oils can be considered viable for the execution of portics.
Keywords: Estruturas de madeira
Madeira laminada colada
Pórticos
Frame structures
Glued laminated timber
Wood structures
CNPq areas: CIENCIAS AGRARIAS::ENGENHARIA AGRICOLA
Idioma: por
País: Brasil
Publisher: Universidade Estadual do Oeste do Paraná
Sigla da instituição: UNIOESTE
Departamento: Centro de Ciências Exatas e Tecnológicas
Program: Programa de Pós-Graduação em Engenharia de Energia na Agricultura
Campun: Cascavel
Citation: FILIPPINI, Daniele Finger. Construção e ensaio de pórticos em madeira colada com reforço nas ligações. 2020. 56 f. Dissertação (Programa de Pós-Graduação em Engenharia de Energia na Agricultura) - Universidade Estadual do Oeste do Paraná, Cascavel - PR.
Tipo de acesso: Acesso Aberto
Endereço da licença: http://creativecommons.org/licenses/by-nc-nd/4.0/
URI: http://tede.unioeste.br/handle/tede/4975
Issue Date: 11-Mar-2020
Appears in Collections:Mestrado em Engenharia de Energia na Agricultura (CVL)

Files in This Item:
File Description SizeFormat 
Daniele_Filippini2020.pdf1.88 MBAdobe PDFView/Open Preview


This item is licensed under a Creative Commons License Creative Commons